Table of Contents
Advertisement
Opening the Case
The enclosure is not designed to be opened.
Mounting Information
Mounting is achieved using the 2 X 5.8 mm holes on 62 mm vertical centres. The ball joint bracket can be
disconnected from the display enclosure to enable mounting of the circular base to the required surface. Loosen
the single Allen key bolt in the base the base to release the ball joint. Once separated the base can be fixed to the
desired surface.
To re-assemble insert the ball joint and display enclosure back into the base mount and tighten the Allen key
clamp bolt once the display has been positioned as required.
Antenna Position
The enclosure is fitted with a T24-ANTA antenna which is mounted in the top end of the enclosure.
Environmental Protection
The enclosure is sealed to IP67.
Mantracourt Electronics Limited
425
T24 Telemetry User Manual
Advertisement
Table of Contents
