Settings - Mantracourt T24 User Manual

Settings

You should not normally need to change these settings.
Items you can change:
List Size
Auto Off Delay
Zero Masking
Mantracourt Electronics Limited
This setting determines how many of the transmitter modules with the highest
signal level make up the list which the next key cycles around.
Based on the application and how many transmitter modules are in the vicinity of
the handheld this list size can affect how the operator uses the handheld.
See Example Scenarios in the Installation section next. Range is between 2 and 20.
Here you can specify the delay in minutes after which the handheld will
automatically turn off after no button is pressed.
Enter zero to disable this function. The default is 5 minutes.
Enter a value in engineering units which represents a band (+/-) about zero within
which zero will be displayed. As soon as the value is outside this band the real value
will be shown. (Only available in version 1.01 onwards)
216
T24 Telemetry User Manual