Connections; Power - Mantracourt T24 User Manual

Connections

Power

On receipt of the module it may be necessary to connect the battery cable to the connector. Take care that the
correct polarity is observed. Usually an external power supply will be required. This is connected to the connector
marked 'External Power' and can be from 9 Vdc to 32 Vdc and able to supply 450 mA. Ensure correct polarity is
observed.
Pair/Reset
RTC Backup
Battery
External Power
As soon as power is supplied the module will enter its startup routine.
The above diagram also shows where to connect the digital input and the alarm output. See later in the manual
for more information on digital IO.
291
Mantracourt Electronics Limited T24 Telemetry User Manual