Table of Contents
Advertisement
m/s
mph
The LCD display can show the following error codes:
Error 1
Error 2
Error 3
Mantracourt Electronics Limited
Even with a degraded signal the display value will always be correct.
The wind speed is displayed in metres per second.
The wind speed is displayed in miles per hour.
The transmitter is indicating a shunt calibration mode. This is not relevant to a wind
speed transmitter so could indicate a system fault.
The transmitter is indicating that the wind speed measured indicates that there is a
system fault.
The wind speed transmitter is not configured for metres per second (m/s) units.
342
T24 Telemetry User Manual
Advertisement
Table of Contents
