Table of Contents
Advertisement
Configuration
The T24 Toolkit provides a means of simple configuration and calibration of the transmitter module along with
useful tools to aid integration.
Launch the T24 Toolkit software application and pair to this module to enable the connection to the Toolkit to
allow configuration to take place.
Input Settings
Use this page to enter the Data Tags of the T24 transmitter modules to be summed and displayed on the T24-
LD1. The user can also set the Data Tag that will trigger a display output along with how the data is formatted.
Parameters:
Waker Duration
Display Update Data Tag
Mantracourt Electronics Limited
See Common Toolkit Pages - Home
Enter the number of seconds the display module will attempt to wake
transmitter modules when it is first powered up. Enter zero to disable this
feature. All transmitter modules on the same radio channel and group key as
the display module will be woken. Use the SleepDelay settings in the transmitter
modules to let them return to sleep after the display module is switched off.
Version 02.00 firmware allows the user to enter zero here which fix the display
update to 3Hz.
Alternatively enter the Data Tag which, on arrival, will trigger a display update.
This could be, for example, the Data Tag configured for a handheld display
function button.
i.e. Entering a Data Tag will allow on demand display updates.
264
T24 Telemetry User Manual
Advertisement
Table of Contents
