Table of Contents
Advertisement
T24 Toolkit
To configure the modules you must use the T24 Toolkit software application. This can be downloaded from our
web site or may be shipped with your products.
The software is suitable for all versions of Windows.
Run setup.exe and follow the prompts to install the software.
In the Toolkit all items that can be changed or interacted with by the user are coloured green.
To change a value just click on the relevant green item. You will then be presented with a new dialog window
allowing you to change the value.
This may use a slider, text box or list to allow your new value to be entered.
A base station will also be required to configure the T24 modules. If you have a USB version of the base station
(T24-BSu or T24-BSue) then you just need to plug this into a USB socket on your PC. If you are using an
alternative base station then please refer to the appropriate section of this manual.
Do not pair to multiple modules with multiple instances of the toolkit at the same time.
26
Mantracourt Electronics Limited
T24 Telemetry User Manual
Advertisement
Table of Contents
