Table of Contents
Advertisement
Receiver Modules
Receiver modules use the messages sent by the transmitter modules. These modules may process or display this
information or convert the data into a different physical format.
T24-HS
Overview
The T24-HS is a simple handheld display. This allows wireless remote viewing of various remote inputs such as
strain gauge or voltage etc. using 2.4GHz radio.
The remote transmitter module measures its input value (strain gauge, voltage, current etc.) and periodically
transmits it.
The T24-HS captures this data and displays it. The T24-HS also performs the function of waking the transmitter
module when it is turned on and sending it to deep sleep mode when it is turned off. The transmitter module can
automatically enter deep sleep mode if the T24-HS is no longer detected.
If no buttons are pressed on the T24-HS it too will turn off after 5 minutes.
Order Codes
T24-HS
Handheld display for use with a single transmitter module in a robust weatherproof enclosure.
Connections
Power
The handheld module is powered by two alkaline AA batteries.
For battery information please refer to
Due to the higher voltage requirements of this module NiMh and NiCad batteries are not
recommended.
Mantracourt Electronics Limited
Appendix D – Battery Selection
178
T24 Telemetry User Manual
Advertisement
Table of Contents
