Zero Settings - Mantracourt T24 User Manual

Zero Settings

System zero allows you to zero the input. The system zero value is subtracted from the input value before it is
used to determine the analogue output to apply.
Performing a System Zero will have the same effect as if the input value to this module is
zero which does not necessarily zero the output from this module. The output value will
depend on the Input/Output scaling.
This page allows either manual entry or to zero the current input value.
Items you can change:
Perform System Zero
Remove System Zero
System Zero
Mantracourt Electronics Limited
Click to use the current input value as the new system zero.
Remove the system zero so that the input value is directly used to determine
the analogue output.
Enter the required system zero value.
229
T24 Telemetry User Manual