Table of Contents
Advertisement
T24-HA
Overview
The T24-HA is an advanced handheld display. This allows wireless remote viewing of multiple inputs such as strain
gauge or voltage etc. using 2.4GHz radio.
The T24-HA also performs the function of optionally waking the remote modules when it is turned on and
sending them to deep sleep mode when it is turned off.
The handheld can operate in two modes. The operation of the buttons and the automatic sleep/wake functions
are dependent on these modes.
Result Mode
This is the default mode in which multiple transmitter modules are used to create a result which is displayed.
Currently the T24-HA only provides a sum of the remote modules but this function may be added to in future
versions. Although the handheld usually shows the result (sum) there is an option of viewing the discrete values
that make up the result.
Item Mode
In this mode each transmitter module is treated as a separate reading and the handheld is used to cycle through
the available items and the value of each can be viewed.
Order Codes
T24-HA
Handheld display for use with multiple transmitters and with advanced functionality.
Connections
Power
The handheld module is powered by two alkaline AA batteries.
For battery information please refer to
Due to the higher voltage requirements of this module NiMh and NiCad batteries are not
recommended.
Mantracourt Electronics Limited
Appendix D – Battery Selection
191
T24 Telemetry User Manual
Advertisement
Table of Contents
