Advanced Settings - Mantracourt T24 User Manual

Advanced Settings

You should not normally need to change these settings.
Items you can change:
Sleep Delay
Data Tag
Transmit power
Mantracourt Electronics Limited
Here you can enter a delay in seconds after which the transmitter module will
return to deep sleep if no Keep Awake message is heard from software,
handheld or other receiving modules. The default is 60 seconds.
The data transmitted is identified with a Data Tag which is a 2 byte hexadecimal
code. By default this is set to the last 2 bytes of the module ID (or to put it
another way, the last 4 characters of the module ID).
If by some chance you had two transmitter modules that would be working on
the same channel and had the same last 4 characters in their ID (1 in 65,535
chances) you may want to change the Data Tag of one of the modules and
perform pairing again with the T24-HS handheld.
Average Wind Speed is transmitted using the defined Data tag.
Optionally Gust Wind Speed is transmitted using the defined Data Tag + 1.
Set the transmit power level from 0 – 100%. Default is 100%
157
T24 Telemetry User Manual