Output Design - Mantracourt T24 User Manual

Output Design

This is where you define the actual output based on free text and tokens.
Tokens are special codes contained within angled brackets <token> which have special meanings and are
converted to actual values once an output is triggered.
See list of tokens at the bottom of this section.
Items you can change:
End Of Line Token
Design Area
Mantracourt Electronics Limited
When you press the Enter key on the keyboard you need to know which token
to include in the design area. For single line outputs this is not an issue but for
multiline printer outputs for example it becomes important. You need to know
what character is used to cause the printer buffer to be printed. For this you will
need to refer to the printer manual. Some printers just require a Carriage Return
<0D> and some may require a Line Feed <0A> or some may require both
<NL>. You would need to set the Line Delay Char on the Output Settings page
to the appropriate character. And here you can select whether to use that
character each time Enter is pressed or you can opt for <NL>.
This is where you create your output using a mixture of free text and tokens.
See the example in the screenshot above.
To enter a token you can type it in or double click the token list on the right of
the page (a single click will display the description of the token).
252
T24 Telemetry User Manual