Appendices
Appendix A - Enclosures
OEM Transmitter Modules
Dimensions
Height is 6.6 mm
Opening the Case
These modules are not housed in an enclosure.
Mounting Information
There are two holes available for mounting. The one nearest the connection pads can accept an M2 screw or
American equivalent #0-80.
DO NOT USE #2 screw size.
Note that the mounting hole is connected directly to the Battery ground of the transmitter module.
The mounting hole near the chip antenna cannot accept metal mounting hardware.
The connection holes are on a 1.9 mm pitch and are a diameter of 1.0 mm.
Mantracourt Electronics Limited
37.5 mm
29.8 mm
O 2.1 mm
4.80 mm
32.12 mm
397
T24 Telemetry User Manual