Power Supply Modules; T24-Bc1; Overview; Physical Connections - Mantracourt T24 User Manual

Power Supply Modules

T24-BC1

Overview

The T24-BC1 is a battery charger and power supply suitable for the T24 range of 3V transmitter modules. The T24
Battery Charger is designed to supply a constant 3.3 V from a Li-ion Battery while also charging the battery from
an input voltage. The unit comes pre-configured to provide a charging current of 466 mA suitable for VARTA
LIP653450. This module also supports additional batteries providing a charge current of 133 mA via the removal
of the leaded resistor (non surface mount).
The battery charger module has been designed to connect to a single T24 transmitter
module.

Physical Connections

Specification

Parameter
Supply Voltage
Regulated Voltage Output
Battery positive connection
Maximum Cable Length
Quiescent Current
* 07/02 gauge wire attached to maximum load i.e. T24-SAf with four 350 ohm strain gauges
Note LED will only be lit when an input voltage is applied
Mantracourt Electronics Limited
Min Typ
4.1 5
- 3.3
- 3.7
-
1.7
403
Max Units
6 Vdc
- Vdc
- Vdc
150 * mm
μA
T24 Telemetry User Manual