Connections; T24-Vae, T24-Vai; Power; Sensor - Mantracourt T24 User Manual

Connections

T24-VAe, T24-VAi

Power

Attach power supply wiring to the module as shown below:
+ 3V Supply
0V Supply
Connect to a 3 Volt power supply or batteries.
This module is not reverse polarity protected!
The maximum voltage is 3.6V!
For battery information please refer to Appendix D – Battery Selection

Sensor

Voltage input connected as follows:
SHLD
-Excitation
-V
+V
+5V Excitation
74
Mantracourt Electronics Limited T24 Telemetry User Manual