Table of Contents
Advertisement
Configuration
The T24 Toolkit provides a means of simple configuration and calibration of the transmitter module along with
useful tools to aid integration.
Launch the T24 Toolkit software application and pair to this module to enable the connection to the Toolkit to
allow configuration to take place.
Data Rates and Quality
This page allows you to select the rate at which data is transmitted from the transmitter module. By selecting low
power mode and entering some other information the toolkit will also give guides on achievable battery life.
Note that the battery life calculator is assuming the best case scenario which is at 20°C and that the battery has a
suitable low internal resistance or that a suitable capacitor is fitted across the battery. See battery details in the
Installation section. The settings chosen on the Input / Output Configuration page will also affect the battery life.
Items you can change:
Transmit Interval
Low Power Mode
Mantracourt Electronics Limited
See Common Toolkit Pages - Home
Enter the transmission rate in milliseconds. The default is 333 giving
approximately 3 per second which is ideally suited to reading on a handheld.
You may want to slow this down to achieve longer battery life.
Unless the transmitter module is non battery powered this should be set to Yes.
In between transmissions the transmitter module and radio will enter a low
power sleep mode which will have a large effect on battery life.
A possible reason for not using Low Power Mode would be if using the module
in a Master-Slave arrangement with PC so the radio must be active and
responsive permanently.
142
T24 Telemetry User Manual
Advertisement
Table of Contents
