Table of Contents
Advertisement
Connections
This diagram shows the available connections and switches.
Power
The module is powered by 8 to 36 Volt DC external power supply.
Digital Inputs
DI1 and DI2 accept voltage inputs. The states of these inputs can optionally be delivered to the cloud platform.
When the input is active a value of 1 will be delivered and a value of 0 when inactive.
Digital Outputs
DO1 and DO2 outputs are open collector and can be optionally configured to reflect the state of two variables on
the cloud platform. These outputs may be used to drive additional relays or drivers to control devices such as
valves, pumps, klaxons etc.
SW1 & SW2
Holding SW1 and SW2 while the module is powered up will clear the internal list of Data Tags that are monitored.
This is useful if the module is used in Automatic input mode and you need to clear the list when the module is
deployed at a new site. See
Mantracourt Electronics Limited
LEDs
SYSTEM
NETWORK
CLOUD
T24
T24 ERROR
SYSTEM ERROR
+
-
POWER
Inputs
DO2
DO1
DI2
DI1
SW1 & SW2
391
T24 Telemetry User Manual
Advertisement
Table of Contents
