Zero Tab - Mantracourt T24 User Manual

Zero Tab

Here you can adjust settings that affect the display of zero. This is only available for the Load channel.
Items you can change:
Power On Zero
Zero Indication Band
Mantracourt Electronics Limited
Here you can determine whether the handheld performs automatic zero when it is
powered on.
Enter zero to disable this function.
If you enter a non-zero value then when the handheld is first turned on it checks
the value read from the transmitter module. If this falls within ± of this value then
the display will be altered so this reads zero. This new zero will persist for the rest
of the time the handheld is powered.
Using this setting you can mask tiny changes in input after you press the Tare
button or are close to zero in gross mode.
Entering zero will disable this function.
Entering a non-zero value will provide a band within which the display will always
read zero.
Once the reading exceeds this value the real weight will be displayed as no taring
is taking place.
354
T24 Telemetry User Manual