Table of Contents
Advertisement
T24-LT1
Overview
The T24-LT1 transmitter module provides OEM's with a versatile wireless Running Line Tensiometer which when
connected to an appropriate piece of hardware gives cable tension, payout and speed. The T24-LT1 connects to a
load pin and quadrature sensor. The quadrature sensor is usually constructed from reed switches and magnets
arranged to give overlapping pulses so that both count and direction can be determined. These pulses can then
be scaled to give distance and speed in engineering units. The load pin measurement is the same as the
successful T24-SA module and can be calibrated and scaled to give tension in engineering units.
The data transmitted by the T24-LT1 can be received by multiple T24 receivers that include displays, handheld
readers, analogue outputs, relay modules and computer interfaces. For the running line tensiometer a dedicated
hand held display has been designed known as the
values transmitted by the T24-LT1.
T24-LT1 has been designed for battery operation and supports an ultra-low-power sleep mode whilst offering
class leading wireless coverage and range. Typical battery life based on a pair of AA cells gives 13 days
continuous operation at transmission rate of 3 readings per second.
Order Codes
T24-LT1
OEM Running Line Tensiometer transmitter module
with external antenna UFL connector.
Mantracourt Electronics Limited
T24-HLT
which allows viewing of the three measurement
163
T24 Telemetry User Manual
Advertisement
Table of Contents
