Table of Contents
Advertisement
T24-RM1
Overview
The T24-RM1 offers dual power relays capable of mains power switching. These relays can be configured as high,
low or window alarms and can be associated with a group of up to 8 T24 transmitter modules per relay.
Relays can operate when the sum of the assigned transmitter modules reach a setpoint or when any of the
modules reach the setpoint. There is also a mode where the difference between the lowest and highest value is
compared to the setpoint. This is ideal for applications where you are looking for a group of weights to be within
a certain band. i.e. balancing four corners of a weigh scale or a hanging truss.
Relays can be latched and a digital input or external command can be used to reset them.
An alarm/error signal relay is operated if communication is lost or other selectable errors occur and this alarm
resets once the source of the alarm or error is removed.
This module is supplied in an IP67 sealed ABS case but a DIN rail option is available.
The state of the power relays during an error can be selected.
Order Codes
T24-RM1
Relay module housed in weatherproof enclosure.
Mantracourt Electronics Limited
233
T24 Telemetry User Manual
Advertisement
Table of Contents
