T24-ACMi-IA
Power
The enclosure is designed to accept two AA batteries. Maximum voltage 1.8 V per cell.
For battery information please refer to
Sensor
The input connections are accessed by lifting the right hand cover plate, this plate incorporates the T24-ACMi
Antenna; take extra care when re-assembling that the grey UHF cable is attached to the antenna socket.
Screw Terminal
Function
1
Shield
2
-Excitation
3
-I in
4
+I in
5
+ 5 V Excitation
Mantracourt Electronics Limited
Appendix D – Battery Selection
92
T24 Telemetry User Manual