T24-ACMi-TA
Power
The enclosure is designed to accept two AA batteries. Maximum voltage 1.8 V per cell.
For battery information please refer to
Sensor
The input connections are accessed by lifting the right hand cover plate, this plate incorporates the T24-ACMi
Antenna; take extra care when re-assembling that the grey UHF cable is attached to the antenna socket.
Screw Terminal
Function
1
Shield
2
-Drive
3
-Sense
4
+Sense
5
+Drive
T24-ACMm-TA
Power
Power is supplied by connecting a 3 V supply to the
There is no reverse polarity protection.
Mantracourt Electronics Limited
Appendix D – Battery Selection
108
T24 Telemetry User Manual