Displayed on handheld LCD.
Error 1
Error 2
Overload
Mantracourt Electronics Limited
The transmitter module has a strain gauge input and is in shunt calibration mode.
An external module has placed the transmitter module in Shunt Calibration mode
so rather than display a misleading reading this error is displayed instead.
Modules such as the T24-SA support this error type.
Input integrity error. The transmitter module has found a problem with the input.
There may be open or short circuits. Rather than display a misleading reading this
error is displayed instead.
Only certain transmitter modules support this error such as the T24-SA.
The overload limit set by the user has been exceeded.
181
T24 Telemetry User Manual