Alarm Settings
This page defines how the individual relays will react to time outs and errors present from any defined T24
module, as well as how Digital inputs 1 and 2 are used.
Items you can change:
Timeout
Error Mode
Error Action
Digital Input 1
Digital Input 2
Mantracourt Electronics Limited
Enter a time in seconds that if exceeded the T24-RM1 will affect the relay state
according to the error action, as well as set the alarm relay and light the time out
LED
The error mode defines what is causes the alarm relay and individual error action
to be triggered. Errors can be defined as
Time out
Time out or Low Battery
Time out or Low Battery or Integrity Error
For each relay the action upon error detection can be defined as ;
Hold Last State
De-Energise Relay
Energise Relay
Digital input 1 can be used to either
Reset Relay 1 from its latched state
Transmit a data provider with user defined data tag containing the total
of the inputs of Relay 1
Digital input 2 can be used to either
Reset Relay 2 from its latched state
Transmit a data provider with user defined data tag containing the total
of the inputs of Relay 2
240
T24 Telemetry User Manual