Logic Input Connections - Mantracourt T24 User Manual

Logic Input Connections

It is not necessary to connect to the logic inputs unless you require the enhanced functionality they provide.
The two contact closures inputs are pre-configured to provide the following functionality:
Contact Closure 1 = Tare
Contact Closure 2 = Net/Gross Toggle
When the Tare contact is closed the display will show zero and the display mode will be
switched to Net.
The logic input provides a 5 Vdc signal. When connected to this common, a current of 1mA will flow. Because this
is a small signal only switches with gold contacts or self-cleaning contacts are recommended.
Mantracourt Electronics Limited
262
T24 Telemetry User Manual