Table of Contents
Advertisement
Configuration
The T24 Toolkit provides a means of simple configuration of the handheld module along with useful tools to aid
integration.
Launch the T24 Toolkit software application and pair to this module to enable the connection to the Toolkit to
allow configuration to take place.
Global Settings
This page allows you to set the operational mode of the module.
Items you can change:
Global Timeout (s)
Do Sleep Wake
Backlight Control
Mantracourt Electronics Limited
See Common Toolkit Pages - Home
This is how long the handheld will wait with no data received from the viewed
transmitter before indicating that the signal has been lost. This should be set to at
least twice the slowest transmitter interval.
You can select whether the handheld wakes the remote transmitter modules on
power up and sends them to sleep on power down.
Select No to disable this function. The default is Yes.
Select whether to disable or enable the backlight. If enabled you can chose to turn
it on as soon as the handheld turns on and have control over its state using the
power key (short press) or you can choose to operate automatically whereby the
light comes on when a key is pressed and goes off after 30 seconds.
350
T24 Telemetry User Manual
Advertisement
Table of Contents
