Advanced Settings - Mantracourt T24 User Manual

Advanced Settings

You should not normally need to change these settings.
Items you can change:
Sleep Delay
Data Tag
Transmit power
Mantracourt Electronics Limited
Here you can enter a delay in seconds after which the transmitter module will
return to deep sleep if no Keep Awake message is heard from the T24-HS
handheld. The default is 60 seconds.
The data transmitted by the module is identified by a Data Tag. This is by
default set to the last 4 digits of the module serial number.
If by some chance you had two transmitter modules that would be working on
the same channel and had the same last 4 characters in their ID (1 in 65,535
chances) you may want to change the data Tag of one of the modules and
perform pairing again with the T24-HS handheld.
Set the transmit power level from 0 – 100%. Default is 100%
175
T24 Telemetry User Manual