Mantracourt T24 User Manual page 281

Token Function
<V1> ... Substitutes token with the last value received from the input. This
<V8> will already have system zero subtracted (If a DoSysZero command
has been issued.) and tare subtracted. (If a DoTare command has
been issued or the switch input has executed a tare.)
<GV1> ... Substitutes token with the last value received from the input. This
<GV8> will already have system zero subtracted (If a DoSysZero command
has been issued.) but no tare subtracted. i.e. it will always contain
the Gross value of the specified input.
<RV1> ... Substitutes token with the last value received from the input. This
<RV8> will NOT have system zero or tare values subtracted.
<TV> Substitutes token with the value carried in the Data Provider packet
that has triggered the 'Print'. Useful if you use the F1 button on a
T24-HA handheld module to trigger a printout as this will contain
either the Gross value or the displayed value as configured by the
handheld.
<LOG> Substitutes token with the log value. Each time a 'Print' occurs the
log number will be incremented.
<G> Substitutes token with the Gross sum of all active inputs. System
zero values will have been extracted.
<N> Substitutes token with the Net sum of all active inputs. System zeros
will have been subtracted and also if a Tare has been issued then
the tare value will be extracted.
<EZ> Substitutes token with the External System Zero.
<GN> Substitutes token with the GrossText or NetText parameter contents
depending on the NetMode.
<xx> Substitutes token with the ASCII character whose ASCII value is xx
where xx is a two digit hexadecimal value. i.e. <0D>
Below are listed some useful hex codes.
Hex Value Description
Token
<0D> Carriage Return
<0A> Line Feed
<09> Tab
<1B> Escape
<1B><2D><01> Start Underline
<1B><2D><00> End Underline
<1B><69><01> Start Reverse Printing
<1B><69><00> End Reverse Printing
<1B><57><02> Start Large Character Printing
<1B><57><01> End Large Character Printing
<1B><63><01> Print in reverse order (This is the default mode.)
<1B><63><00> Print as designed (Should be placed at the top of the design)
Mantracourt Electronics Limited
280
Example
1.2345
1.2345
1.2345
1.2345
0003
1.2345
1.2345
1.2345
Gross
ÆӪ-ü▀
T24 Telemetry User Manual