Appendix H - Oem / Reseller Marking And Documentation Requirements - Mantracourt T24 User Manual

Appendix H - OEM / Reseller Marking and Documentation
Requirements
CE
The T24 series has been certified for several European countries.
If the transmitter module is incorporated into a product, the manufacturer must ensure compliance of the final
product to the European harmonised EMC and low-voltage/safety standards. A Declaration of Conformity must
be issued for each of these standards and kept on file as described in Annex II of the R&TTE Directive.
Furthermore, the manufacturer must maintain a copy of the T24 device user manual documentation and ensure
the final product does not exceed the specified power ratings, antenna specifications, and/or installation
requirements as specified in the user manual. If any of these specifications are exceeded in the final product, a
submission must be made to a notified body for compliance testing to all required standards.
OEM Labelling Requirements
The 'CE' marking must be affixed to a visible location on the OEM product.
The CE mark shall consist of the initials "CE" taking the following form:
Mantracourt Electronics Limited
If the CE marking is reduced or enlarged, the

proportions given in the above drawing must be
respected.
The CE marking must have a height of at least 5 mm

except where this is not possible on account of the
nature of the apparatus.
The CE marking must be affixed visibly, legibly, and

indelibly.
464
T24 Telemetry User Manual