Table of Contents
Advertisement
Zero Indication Band
Using this setting you can mask tiny changes in input after you press the Tare
button.
Entering zero will disable this function.
Entering a non-zero value will provide a band within which the display will always
read zero.
Once the reading exceeds this value the real weight will be displayed as no taring
is taking place.
Example: You are adding boxes to a platform and you press tare between adding
each one so you can see the weight of each box.
Without this setting activated each time you tare the display will be around zero
but not exactly zero (By setting the display resolution you may hide this
difference) by setting a small value here such as 0.2kg the display will show a
stable zero while actual weight is fluctuating less than ± 0.2kg.
184
Mantracourt Electronics Limited
T24 Telemetry User Manual
Advertisement
Table of Contents
