Alarm Settings - Mantracourt T24-ACMi-SA User Manual

Alarm Settings

Here you can set the action to take when certain errors occur.
The actions are applied when the errors occur and if more than one error is present the actions are applied with
the following priorities:
Timeout Action, Remote Error Action, Remote Batt Action
When errors are removed the analogue output resumes reflecting the current input.
Items you can change:
Timeout
Timeout Action
Remote Error Action
Remote Batt Action
Mantracourt Electronics Limited
Enter the timeout in milliseconds for the input to timeout. If a new Data
Provider packet does not arrive within this time the Timeout Action will trigger.
Generally this timeout should be set to at least three times the transmitter
module transmission rate.
Select the action to take place when a timeout occurs. i.e. when
communications (for more than the duration of the Timeout value) are lost with
the transmitter module.
See the Output Actions section for the available actions and the effect of these
choices on the different output ranges.
Transmitter modules can report errors. You will need to refer to the module
manual for information regarding what constitutes an error.
See the Output Actions section for the available actions and the effect of these
choices on the different output ranges.
When the transmitter module reports a low battery this action will occur.
See the Output Actions section for the available actions and the effect of these
choices on the different output ranges.
223
T24 Telemetry User Manual