Do You Have Enough Memory To Load All Your Personality Options - Agilent Technologies PSA Series Manual

host ID.
For the latest information on Agilent Spectrum Analyzer options and
upgrade kits, visit the following Internet URL:
http://www.agilent.com/find/sa_upgrades
Do You Have Enough Memory to Load All Your Personality
Options?
If you want to operate the instrument with four or fewer personality
options installed, you can skip ahead to the next section,
Optional Measurement Personality" on page
options, you get error messages relating to memory issues, you can
return to this section to learn more about how to optimize your
configuration.
If you want to install your 4th or subsequent option, you should check
to see how much memory you have available.
If you have Option 115 (512 MBytes of memory) installed in your
instrument, all personalities can be loaded.
If you don't have Option 115 installed, depending how much data you
save, you are unlikely to have any memory issues until you want to
install your 4th option. If this is the case, you can either swap the
applications in/out of memory as needed, or you can upgrade your
hardware to Option 115 (512 MBytes of memory).
To see the size of your installed memory for PSA Series Spectrum
Analyzers:
1. Ensure that the spectrum analyzer is in spectrum analyzer mode
because this can affect the screen size.
2. Press the key,
System
3. Read Flash Memory size at the end of the table.
PSA Flash Available Memory
Memory Size With No Options
64 Mbytes 32.5 MBytes
48 Mbytes 16.9 MBytes
Instruments with Option 115 will additionally show a compact flash file
size of 512 MBytes.
Chapter 1
20. If, after installing your
, and
MORE (1 of 3) Show Hdwr
Available Memory With
Option B7J and/or Option 122
30.0 MBytes
14.3 MBytes
Getting Started
Installing Option 215
"Loading an
keys.
17