To Load The Custom Fonts - Agilent Technologies 1660C Series User Manual

Using the X Window Interface

To load the custom fonts

To load the custom fonts
From the computer running your X server software, access the logic
1
analyzer's file system.
Refer to the "Accessing the Logic Analyzer File System" chapter.
Copy the SM165.BDF and LG165.BDF files from the analyzer's
2
\system\disk\hard\system directory to a directory on your
computer.
Set up the X server so that it can read these fonts.
3
Refer to your X Windows server documentation for instructions on loading
and using custom fonts. Generally, the steps you will take are:
Compile the .BDF files into the proper format.
a
Build the font directory (FONTS.DIR) file.
b
If the font directory is not in the current font path, add the new
c
directory to the font path.
The custom fonts make the analyzer's X Window interface look identical to
the instrument's display. If the custom fonts are not loaded, you will see odd
characters in place of arrow symbols and may see out-of-bounds text in the
X Window image.
3-10