Transfer The Program; Close The Instrument Basic Editor; To Load An Array In An Instrument Basic Program To The External Controller; Transfer The Program Array Of Instrument Basic - Agilent Technologies 4396B Gpib Programming Manual

Transfer the Program

Transfer the program by line to the analyzer. When all program lines are transferred, the
computer exits the loop and goes to line 170.

Close the Instrument BASIC Editor

Sending the analyzer the
To Load an Array in an Instrument BASIC Program to the
External Controller
d
c
Sample Program : To Load Instrument BASIC Program Array (on External Controller)
This program retrieves the array generated in the sample program listed in Figure 4-2 when
that program is executed in Instrument BASIC. This information is transferred to the external
controller.
First, run the Instrument BASIC program
program in Figure 7-5 to transfer the data.

Transfer the Program Array of Instrument BASIC

The
array is entered into
7-6 Controlling Instrument BASIC from Remote
command closes the editor.
Figure 7-5.
query returns the program array
.
to store the data into the array. Then run the
of Figure 4-2. The
a
b