Using the Emulation Probe
Using the Emulation Control Interface
Using the Emulation Control Interface
The Emulation Control Interface lets you run, stop, break, and reset the target
processor. The Emulation Control Interface can be accessed through a 16700-
series logic analysis system.
Using the emulation probe with a 16700-series logic
analysis system via an emulation module
The following instructions explain how to use the emulation probe with a
16700-series logic analysis system which has an emulation module installed.
1 Select the emulation module icon in the System window.
2 Select Connect to Emulator... from the menu choices.
3 Select the Connect to Emulator button.
4 The emulation Run Control window will appear, which lets you use the
Emulation Control Interface.
76
Emulation for the Motorola M•CORE