To Access The File System Via Ftp - Agilent Technologies 1670G Series User Manual

Accessing the Logic Analyzer File System Using the LAN
Accessing the Logic Analyzer File System Using the LAN

To access the file system via ftp

To access the logic analyzer's file system using ftp, enter the following
command on your computer:
ftp [symbolic name|IP address]
The symbolic name is the host name of the logic analyzer as set up by
your system administrator. Typically, this name is found in the hosts
file on your computer or returned by a name server. It is equivalent to
the analyzer's IP (Internet Protocol) address.
When the connection is made, you will be prompted for a login name.
Enter "control" or "data" depending on the type of access you want.
If you are prompted for a password, just press the Return or Enter key.
There is no password protection built into Agilent logic analyzers.
Example Using ftp
To access the file system of the logic analyzer named 1670sys using ftp
enter:
ftp 1670sys
login name: data
ftp>
The exact commands you use within ftp depend on the software. If you
are not familiar with your ftp software, type "?" or "help" at the ftp
prompt to see a list of commands.
496