The Buttons At A Glance; Figure 1-4 Hold/Max Min Button; Table 1-3 Hold/Max Min Button Description - Agilent Technologies U1211A User's Manual And Service Manual

The buttons at a glance

The operation of each button is shown below. Pressing a key changes the
current operation, changes the status in the annunciator on the display,
and generates a button- click sound (a beep).
Using the Hold/Max Min button

Figure 1-4 Hold/Max Min button

The Hold/Max Min button on the clamp meter has two functions: data
hold and dynamic recording. See
and

Table 1-3 Hold/Max Min button description

Button
In Setup mode, the Hold/Max Min button is designated as a Save button.
See
User's and Service Guide
"Dynamic Recording"
Description
• Press Hold/Max Min momentarily to perform data hold operation. The annunciator
display will indicate DH, which means a reading has been freezed. Press and hold
Hold/Max Min for more than 1 second to disable data hold operation.
• Press Hold/Max Min for more than 1 second (with the data hold function turned off) to
perform dynamic recording mode. The annunciator display will first indicate MAX AVG
MIN. Press Hold/Max Min momentarily to cycle through dynamic recording (maximum,
minimum, or average) functions. Press and hold Hold/Max Min for more than 1 second
to disable dynamic recording function.
"Selecting Setup Menu"
"Data Hold (Trigger Hold)"
on page 56 for more information.
on page 64 for more information.
Getting Started
Product at a glance
on page 52
27
1