Printing A Center Mark - Ricoh 2400L Operator's Manual

ADVANCED FEATURES

Printing a Center Mark

If you switch this feature on, a mark is printed halfway down each received page
on the left hand side. This makes it easy for you to position the hole puncher
correctly when you file away the received fax messages.
The center mark is not printed when you use the machine for making copies.
To switch this feature on, do the following. (See page 156 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Press Yes. The settings for switch 00 are
now shown on the bottom line of the dis-
play.
3. Press until the settings for switch 02 are
k
shown.
The setting that you need to change is
digit 1 (double underlined).
4. If you wish to change the setting, press 1
on the ten keypad.
5. Finish: Yes and Function.
j
Digit 1 (Double underlined)
0: The center mark will not be
printed.
1: The center mark will be
printed.
RECEPTION
j
j k
j k
91