Disassembling The Mp00 Rf Lens Assembly; Figure 65. Mp00 And Lens L0 Wiring Connections (Ltq Xl) - Thermo Scientific LTQ Series Hardware Manual

Disassembling the MP00 RF Lens Assembly

Thermo Scientific
 To disassemble the MP00 rf lens assembly
CAUTION Be careful not to bend or break the lead pins on the MP00 rf lens.
1. Carefully pull out the leads radially from the lead pins on the MP00 rf lens
Figure 65 shows multipole MP00 and lens L0 removed from the outer cage.

Figure 65. MP00 and lens L0 wiring connections (LTQ XL)

MP00 rf lens
2. Place your fingers between MP00 and L0, and then gently pull the MP00 rf lens forward
and out of the outer cage
the small slotted screwdriver.
3. Gently push lens L0 to the back of the outer cage
ball plungers by using the small slotted screwdriver.
(Figure 66). If necessary, first loosen the ball plungers by using
(Figure
5
MP00 RF Lens Maintenance
Top lead pin
L0 lead pin
Lens L0
Bottom lead pin
66). If necessary, first loosen the
LTQ Series Hardware Manual
Maintenance
(Figure 65).
95