Program System; Overview Of Programming - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

Program System

Overview of Programming

To program the system:
1. Use the 3300 Configuration Tool. Refer to the 3300
Configuration Tool online help for programming information.
2. Use the System Administration Tool. Refer to the System
Administration Tool online help for programming information.
3. Use IMAT.
4. Register the IP telephones.
Note: The following options are required in the DHCP server
programming:
3 (Router) Default Gateway IP Address
-
6 DNS Server IP Address
-
66 TFTP Server ASCII String format (typically the 3300
-
ICP Controller)
67 TFTP BootFile (ASCII String = /sysro/e2t8260)
-
128 TFTP Server IP address format (typically the 3300
-
ICP Controller)
129 RTC IP address format (typically the 3300 ICP
-
Controller)
130 IP phone DHCP Server (ASCII String = MITEL IP
-
PHONE)
132 VLAN ID for the voice LAN (Hex - 32 bit word,
-
optional)
133 Priority, values of 1-7 (Mitel recommends 6;
-
optional).
- 124 -