Mitel 3300 ICP Technician's Handbook page 32

3300 ICP Technician's Handbook – Release 3.2
4. Enter an Area Code and Telephone Number and select a
Country Code from the drop-down list. Click Next. Note: Even
though it is not needed for a direct connection, Windows
requires that you enter this information.
5. Click Finish.
6. Right-click your new connection icon and click Properties.
7. Click Configure. Ensure the fields are set as follows:
- Data bits: 8
- Parity: none
For a direct connection:
- Maximum speed: 38400
- Check: only connect at this speed
- Select wait for dial tone before dialing
- Select cancel the call time at 60 sec.
- Click Advanced and turn off error control and flow control
For a remote connection:
- Stop bits: 1
- Click Advanced and turn on error control and select Compress
data.
- Turn on flow control and select Hardware.
8. Click OK.
9. Select Server Types tab and make sure that PPP: Windows,
WindowsNT3.5, Internet or PPP:Internet appears in the Type of
Dial-Up Server field.
10. In the Advanced Options field, select Log onto Network and
Enable software compression.
11. Make sure that only TCP/IP is selected in the Allowed network
protocols field.
12. Select the Scripting tab and enter c:\program
files\mitel\Imat\pridun.scp for a 3300 Universal NSU c:\program
files\mitel\Imat\r2dun.scp for a 3300 R2 NSU.
13. Click OK.
Dial-up Connection for Windows 2000
To create a dial-up networking connection for Windows 2000
Professional:
- 24 -