To Ping From The 3300 Icp; To Ping From The Ip Phone; Console; Superconsole 1000 Console - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

To PING from the 3300 ICP

1. Select Maintenance and Diagnostics in the System
Administration Tool.
2. Select All IP Telephones or Programmed Telephones.
3. Select a telephone with an In Service state.
4. Click PING.
5. In the To IP Device field, select Number or IP.
6. Type the Directory Number or IP Address.
7. Click PING. The Ping Result field will display the number of
successful and failed PINGs.

To PING from the IP Phone

1. View and record the IP phone device address, subnet mask,
and default gateway.
2. Press SuperKey while connecting power to the IP phone until
the set displays MANUAL IP SETUP MODE.
3. Enter the IP address for the phone and press the Down arrow
key.
4. Enter the subnet mask for the phone and press the Down arrow
key.
5. Enter the default gateway for the phone and press Down arrow
Key.
6. At the message "Perform PING Test", press #.
7. Enter the destination IP address. The phone display will
indicate PINGING. The phone will also display the number of
successful and failed PINGs.
8. Disconnect and Reconnect the Power to reboot the IP phone.

Console

SUPERCONSOLE 1000 Console

If you suspect a problem with a SUPERCONSOLE 1000 console,
check for problems with the following components:
- 162 -