3200 Icp To 3300 Icp; Software; Software Upgrade Procedure - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2
•
If existing capacity is greater than that of the 3300 ICP, the
conversion may fail. See the capacity table for the 3300
ICP.
By installing a triple FIM card in the SX-2000 MICRO LIGHT main
cabinet, you can physically connect it to the 3300 ICP by using
multi-mode fiber. As a result, you can use the existing peripheral
and digital trunk cards within the main cabinet. Connect any
external cabinets by using FIMs.

3200 ICP to 3300 ICP

To upgrade 3200 ICP hardware for 3300 ICP control:
•
If existing capacity is greater than that of the 3300 ICP, the
conversion may fail. See the capacity table for the 3300
ICP.
The 3200 ICP database is converted and restored to a 3300 ICP
database, and any peripheral cabinets connected to the FIM ports
on the 3300 Controller.
In addition to the DNIC telephones supported by the peripheral
cabinet, the 3300 ICP supports the following legacy IP telephones:
•
SUPERSET 4015IP
•
SUPERSET 4025IP.

Software

Software Upgrade Procedure

Before you begin:
•
Ensure you have a new option password
•
Ensure you have a 3300 ICP system back-up
•
Upgrade OPS Manager if you are using it to manage your
system, to minimum Version 6.6
•
Inform all system users that the system is being upgraded.
•
Windows 2000 users should clear the browser cache.
Ensure that your PC is equipped with the following software and
hardware:
- 89 -