Mitel 3300 ICP Technician's Handbook page 52

3300 ICP Technician's Handbook – Release 3.2
numbered plug and half to the even-numbered plug. Peripheral
Wiring (Backplane) details the hardwire connections between one
slot group and the associated plugs. The wiring sequence is
identical for the remaining three slot groups.
Cable jacks (P1 through P8), are customer-supplied and should be
labeled at time of installation. P1 through P8 are secured to J1
through J8 with hook and loop type fasteners. Equipment that is
external to the system (i.e., system to cross-connect field cables
and cross-connect field hardware) is not supplied by MITEL.
Therefore, the type of equipment used and the layout of the cross-
connect field cables is at the discretion of the installation company.
Installation information for such equipment must be obtained from
the equipment manufacturer.
Backplane Connector Arrangements
- 44 -