Mitel 3300 ICP Technician's Handbook page 107

3300 ICP Technician's Handbook – Release 3.2
4. Backup 3800 WAG database (datasave) to the 3300
Configuration Tool.
The Configuration Tool will convert the 3800 database to a
3300 database.
5. Change the Variant to 3300 ICP and change the IP Address if
required.
6. Perform a Restore of the 3800 WAG converted database onto
the 3300 ICP.
An automatic validation operation occurs to determine if the
restore can proceed.
7. Reboot the 3300 ICP.
Check the logs for any data restore failures (see Note).
8. Collect the telephone directory information from the 3300 ICP
using the Telephone Directory Full Collect application in the
Configuration Tool.
9. Collect unused circuit information from the 3300 ICP using the
Collect Unused Directory Circuits application in the
Configuration Tool.
10. Import the .csv file that contains the Name, Number and PIN
information of each Symbol phone user using the Moves, Adds
and Changes Import application in the Configuration Tool.
11. Change the 3300 ICP system name and the default
usernames/passwords using the System Administration Tool.
12. Update the firmware in the Symbol NetVision phone. Refer to
the Symbol NVP II MiNET Update Procedure located in the
Hardware User Guide On-line Help.
13. Complete the programming of the Symbol phone using the
Symbol NetVision MiNET Phone Administrator Tool.
Note: After the Restore and Reboot, check the log file. In the
System Administration Tool, click Maintenance and
Diagnostics, select Maintenance Commands, and click All.
Type the following text in the Command line:
- 99 -
type *.dr.logfile_1