Mitel 3300 ICP Technician's Handbook page 110

3300 ICP Technician's Handbook – Release 3.2
3. Remove the faceplate.
4. Remove the screws and lock washers from the Dual FIM
Module.
5. Pull up on the module to remove it.
To install a Dual FIM Module:
1. Remove the cover.
2. Remove the two Philips screws from the faceplate in slot MMC
2.
3. Remove the faceplate.
4. Remove the Dual FIM Module from the packaging, line up the
connectors and firmly seat onto the board.
5. Secure the module onto the board using the screws and lock
washers provided.
6. Replace the cover.
DSP or Echo Canceller Module
CAUTION: To prevent ESD damage while handling modules on
any unit, always attach the wrist strap from the cabinet being
serviced, and immediately place any item removed from a
cabinet into an anti-static bag.
CAUTION: Do not drop screws or lock washers in the
controller.
To remove an MMC Module:
1. Remove the cover.
2. Remove the screws and lock washers from the module.
3. Pull up on the module to remove it.
4. Replace the cover.
To install an MMC Module:
1. Remove the cover.
2. Line up the module and firmly seat it onto the board.
- 102 -