Mitel 3300 ICP Technician's Handbook page 31

3300 ICP Technician's Handbook – Release 3.2
9. Click Finish.
10. The COM Port will be displayed in the Phone and Modem
Options window, Modems tab. Select the COM Port and then
click Properties.
11. From the Maximum Port Speed drop-down menu, select
38400.
12. In the Communications cable between two computers, select
the Advanced tab, and then click Change Default
Preferences.
13. From the Port speed drop-down list select 38400, and then
from the Flow control drop-down list select None.
14. Select the Advanced tab. From the drop-down menus, set the
fields as follows: - Data bits: 8 - Parity: none - Stop bits: 1
15. Click OK and close the Control Panel window.
Create a Dial-up Network Connection
Typically, you will want to follow this procedure twice to create two
Dial-up Networking connections, one for on-site direct access, and
one for remote modem access.
Refer to detailed instructions for:
•
Dial-up Networking Connection for Windows 95 or Windows 98
•
Dial-up Network connection for Windows 2000 Professional
Dial-up Connection for Windows 95 or Windows 98
To create a dial-up networking connection for Windows 95 or
Windows 98:
1. On the Start menu, point to Programs, point to Accessories,
and then click Dial-Up Connections.
2. Double-click Make New Connection.
3. Enter an appropriate name for the connection (for example,
Direct for direct connections, Remote or a customer's name for
remote connections) and click Next. Note: If you are creating a
direct connection, make sure NT Direct Connection is listed in
the drop-down list in the Make a New Connection window.
- 23 -