Mitel 3300 ICP Technician's Handbook page 30

3300 ICP Technician's Handbook – Release 3.2
7. Type c:\Program Files\Mitel\Imat in the Copy manufacturer's
files from field and click OK.
8. On the Install from Disk window, click OK.
9. Click Next to select the NT Direct Connection.
10. Select COM 1 or COM 2, and then click Next.
11. Click Finish.
12. In the Modem Properties window, select NT Direct
Connection, and then click Properties.
13. Set the following parameters:
- Maximum speed: 38400
- Check: only connect at this speed
- Data bits: 8
- Parity: none
- Stop bits: 1
- Mode: auto answer In the Advanced Settings window, do the
following for a direct connect cable:
- Turn off: error control
- Turn off: flow control
14. Click OK and close the Control Panel window.
Driver for Windows 2000
To install and configure Direct Connection Device Driver for
Windows 2000 Professional:
1. On the Start menu, point to Settings, then click Control Panel.
2. Double-click Phone and Modem Options icon.
3. Select the Modem tab.
4. Click Add.
5. Click Other on the Install New Modem screen.
6. Select Don't detect my modem, I will select it from a list and
click Next.
7. In the Modems field, select Communications cable between
two computers, then click Next.
8. Select COM 1 or COM 2, then click Next.
- 22 -