Mitel 3300 ICP Technician's Handbook page 105

3300 ICP Technician's Handbook – Release 3.2
the Configuration Tool. The Configuration Tool will convert the
3200 database to a 3300 database.
4. Change the Variant to 3300 ICP and change the IP Address if
required.
5. Perform a Restore of the 3200 ICP converted database onto
the 3300 ICP.
An automatic validation operation occurs to determine if the
restore can proceed.
6. Reboot the 3300 ICP.
Check the logs for any data restore failures (see Note).
7. (Optional - see Note) Collect the telephone directory information
from the 3300 ICP using the Full Collect application in the
Configuration Tool.
8. (Optional - see Note) Collect information on the free PLIDs
using the Free PLID Collection application.
9. (Optional - see Note) Import the .csv file that contains the
Name, Number and PIN information of each Symbol phone
user using the Moves, Adds and Changes Import application in
the Configuration Tool.
10. Change the 3300 ICP system name through the System
Administration Tool.
11. Deprogram the 3200 ICP FD_DSU using the System
Administration Tool.
12. Install new hardware (Network Services Unit or DSU Cabinet).
13. Reprogram the digital links.
14. (Optional - see note) Update the firmware in the Symbol
NetVision phone. Refer to the Symbol NVP II MiNET Update
Procedure.
15. (Optional - see Note) Complete the programming of the Symbol
phone using the Symbol NetVision MiNET Phone Administrator
Tool.
Note: After the Restore and Reboot, check the log file. In the
System Administration Tool, click Maintenance and
- 97 -