Mitel 3300 ICP Technician's Handbook page 173

3300 ICP Technician's Handbook – Release 3.2
3. Back up the 3300 ICP database (including voice mail) to your
PC.
4. Insert the Mitel Networks 3300 ICP software CD-ROM into the
CD drive of the installer's PC.
5. Run the "Setup.exe" program from the CD.
6. Select New Installation.
7. Choose a location for the installSetup program to install files
(normally that is C:\intpub\ftproot). installSetup program
provides a progress indicator and a log file.
8. Click Finish when prompted. You are presented with a text file
providing instructions.
9. Launch your communications program that connects to the
3300 ICP serial port.
10. Enter reboot to reboot the 3300 ICP.
11. Press a key at the "Press any key to stop auto-boot" prompt to
stop the auto-boot.
12. At [VXWorks Boot] type c and then press Enter.
13. Change the following parameters as indicated:
- Boot device : motfcc
- File name : Boot_Install
- Host inet : <the IP address of the ftp server PC host (your
PC)>
- User (u) : <user name for FTP server in PC host>
- Ftp password (pw) (blank = use rsh) : <password for FTP
server in PC host>
- Flags (f) : 0x0 (for RTC only).
14. Press the reset button on the 3300 ICP. The software
installation will take about 45 minutes.
15. Login to the System Administration Tool (username: system;
password: password).
16. Set the options in the License and Option Selection form:
- Select the System Administration Tool.
- Select System Configuration from the pull-down menu.
- 165 -