Mitel 3300 ICP Technical Configuration Notes
Mitel 3300 ICP Technical Configuration Notes

Mitel 3300 ICP Technical Configuration Notes

Sip coe
Hide thumbs Also See for 3300 ICP:

Advertisement

MITEL – SIP CoE
Technical
Configuration Notes
Configure the 3300 ICP for use with
Avaya SES
SIP CoE 10-4940-00111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3300 ICP and is the answer not in the manual?

Questions and answers

Summary of Contents for Mitel 3300 ICP

  • Page 1 MITEL – SIP CoE Technical Configuration Notes Configure the 3300 ICP for use with Avaya SES SIP CoE 10-4940-00111...
  • Page 2 Mitel Networks™ Corporation (MITEL ). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document.
  • Page 3: Table Of Contents

    Table of Contents OVERVIEW ....................... 1 Interop History........................1 Interop Status ........................1 Software & Hardware Setup....................1 CONFIGURATION NOTES ..................2 3300 Configuration Notes ....................2 Network Requirements........................2 Assumptions for the 3300 Programming..................2 Licensing and Option Selection – SIP Licensing ................3 Class of Service Assignment ......................
  • Page 5: Overview

    This document provides a reference to Mitel Authorized Solutions providers for configuring the Mitel 3300 to connect to a Avaya SES. The different devices can be configured in various configurations depending on your VoIP solution. This document covers a basic setup with required option setup.
  • Page 6: Configuration Notes

    Avaya SES and 3300 programming was configured in our test environment. Disclaimer: Although Mitel has attempted to setup the interop testing facility as closely as possible to a customer premise environment, implementation setup could be different onsite.
  • Page 7: Licensing And Option Selection - Sip Licensing

    10-4940-00119 Nortel CS1K Licensing and Option Selection – SIP Licensing Ensure that the 3300 is equipped with enough SIP trunking licenses for the connection to the Avaya SES This can be verified within the License and Option Selection form. Enter the total number of licenses in the SIP Trunk Licences field. This is the maximum number of SIP trunk sessions that can be configured in the 3300 to be used with all service providers, applications and SIP trunking devices.
  • Page 8: Class Of Service Assignment

    10-4940-00119 Nortel CS1K Class of Service Assignment The Class of Service Options Assignment form is used to create or edit a Class of Service and specify its options. Classes of Service, identified by Class of Service numbers, are referenced in the Trunk Service Assignment form for SIP trunks. Many different options may be required for your site deployment, but ensure that “Public Network Access via DPNSS”...
  • Page 9: Network Element Assignment

    10-4940-00119 Nortel CS1K Network Element Assignment Create a network element for the Avaya SES. In this example, the Avaya SES is reachable by FQDN (Make sure the 3300 is using a DNS server that can resolve the FQDN) and is defined as CS1K-EBX”...
  • Page 10 10-4940-00119 Nortel CS1K SIP Peer Profile The recommended connectivity via SIP Trunking does not require additional physical interfaces. IP/Ethernet connectivity is part of the base 3300 Platform. The SIP Peer Profile should be configured with the following options: NOTE: Ensure the remaining SIP Peer profile policy options are similar the screen capture below.
  • Page 11: Trunk Service Assignment

    10-4940-00119 Nortel CS1K Trunk Service Assignment This is configured in the Trunk Attributes form. In this example the Trunk Attributes is defined for Trunk Attributes Number 4 which will be used to direct incoming calls to an answer point in the 3300.
  • Page 12: Route Assignment

    10-4940-00119 Nortel CS1K Route Assignment Create a route for SIP Trunks connecting a trunk to the Avaya SES. In this example, the SIP trunk is assigned to Route Number 4. Choose SIP Trunk as a routing medium and choose the SIP Peer Profile and Digit Modification entry created earlier.
  • Page 13: Ars Digits Dialed Assignment

    10-4940-00119 Nortel CS1K ARS Digits Dialed Assignment ARS initiates the routing of trunk calls when certain digits are dialed from a station. In this example, when a user dials 80XXXX, the call will be routed to the CS1K (ie. Route 4). Figure 4 –...

Table of Contents